Salt Terna Spreader prevents the icing on the roads by spreading the salt, aggregate and liquid de-icing material inside its hopper and liquid tanks to the roads in winter. The top important issue for de-icing is to spread the mixture to the unit sqm of the roads at preferred density, amount and width in order to succeed at Winter Maintenance operations due to changing road and weather conditions.

Salt Terna Spreaders have a hydraulic circuit composed of high quality hydraulic components, an electronic control panel controlling this circuit and a heavy strength mechanical structure that enables the machine to work properly under hard road and climate conditions. Salt Terna Spreaders Hoppers are produced from Stainless Steel or Carbon Steel, optionally.

Salt Terna Spreaders are standardly mounted to any kind of tipper with its “Modular Hopper “ which enables to increase or decrease the hopper capacity in case of a change of carrying vehicle. As it enables to add mid-size hoppers, the vehicle’s carrying capacity is used more efficiently.

 

 

 

 

 

Mix Terna Combination Sprayer & Spreader prevents the icing on the roads by spraying the liquid de-icing material in its water proof Polyethylene tanks through its nozzles located at the rear side of the vehicle and spreading the dry de-icing material inside its hopper through its spinner in winter time.

Mix Terna enables any de-icing material to be sprayed or spreaded to the road homogeneously depending on traffic, weather, environment or road conditions in order to provide the optimum Winter Maintenance. As per changing conditions, the operator shall either spray the liquid de-icing material through spraying nozzles or spread the dry or pre-wet salt through spinner.

Mix Terna is able to spray 3 positional spraying both to the right, left and center between 3.5 to 10.5 meters. Spraying through the spraying nozzles, located at the rear of the vehicle also helps to reduce the fogging on the road.

Mix Terna aims to protect the environment by reducing the salt amount used during Winter Maintenance besides reducing the salt costs. Mix Terna’s spraying dosage reaches to 70 gr/m² at 60 km/h and 40 gr/m² at 80km/h.

Mix Terna’s liquid de-icing materials tanks are produced from high-strenght polyethylene materials and the hopper is produced from Stainless Steel or Carbon Steel optionally.

Because Mix Terna’s standard and independent polyethylene tanks and Hopper are modularly designed, they are standardly mounted to any kind of tipper. It enables to increase or decrease the tanks and hopper capacity in case of a change of carrying vehicle and constructing mid-size capacity tanks and hoppers provides more efficient usage of the carrying vehicle capacity.